TX3190 Wireless Standalone Smoke Detetor
40+ years
Experience
400+ Patents
Full sets LPCB
1,000,000+
projects worldwide
Global on site
after sale service
7x24h
response service
Menu
Feature and Benefits
•EN54-18 Compliance
•Built-in MCU processor and digital addressing
•Fire or Supervisory signal configuration
•Input cable monitored
•Normally open configuration
•LED status indicator
•Loop powered device
•Surface mounting with fix base for simple installation
Technical Specification
Operating voltage: DC 3V, powered by two lithium batteries (one for the IoT communication unit and one for the alarm unit).
Operating current: Ultra-low power consumption with monitoring current <40 μA and alarm current <40 mA.
Alarm sound: Sound pressure level higher than 80 dB at 3 m directly ahead (A-weighted).
Wireless communication system: LoRa.
Protection area: Approximately 60–100 m².
IoT communication unit indicator light: Normal status shows green LED flashing every 60 s; fault status shows yellow LED flashing every 60 s.
Operating environment: Temperature range –10 °C to +50 °C, relative humidity ≤95% RH, non-condensing.
Wireless Alarm System Application
Wireless Alarm System is very large scale application, eg Cottages, Restaurant, Kindergarten, Domestic, Work Stations, Bar, Resorts, Bank
Wireless Fire Alarm Panels System
A Wireless Fire Alarm Panels System is powerful home-use fire alarm system that not only requires a core control panel like the TX7004 fire alarm panel or TX3003M Wireless Fire Alarm Panel which was designed according to EN54-2 standard, but also needs to be paired with other detectors, modules, and appropriate configurations based on the project’s scale to maximize its effectiveness.
TX3180 Wireless Heat Detector
TX3231 Wireless Relay Module
TX3260 Two Wire Gateway
TR3106A Wireless Methane Gas Detector
TX6934 Fire Alarm Handheld Programmer
TW3232 Wireless Fire Alarm Sounder Strobe
TX3190 Wireless Smoke Detetor
TW3240 Wireless Manual Call Point
