TX7322 Addressable Fire Alarm Sounder Base

40+ years
Experience

400+ Patents
Full sets LPCB

1,000,000+
projects worldwide

Global on site
after sale service

7x24h
response service

Overview: TX7322 Addressable Sounder Base

The TX7322 Addressable Sounder Base sends a fire alarm signal to the alarm area in the form of sound. It is a kind of alarm device that is used more frequently on site. It is installed in places where there is a lot of noise or it is inconvenient to send out flashes.

Feature and Beneﬁts

•EN54-3 Compliance
•8 high-light LED Loop powered sounder strobe detector base
•Can be activated by the attached detector
•Built-in MCU processor and digital addressing
•17 tones Programmable sound output
•Programmable Evacuate or Pre-alarm/Evacuate signal
•Programmable One or Two address mode
•Onsite Adjustable Parameters
•Mounting base using TX7980 (excluded)

Technical Speciﬁcation

Input Voltage: Loop Power: 24VDC [16V to 28V]
Current Consumption: Standby ≤0.8mA, Alarm: ≤4mA[Loop powered]
Protocol/Addressing: T&A, Value range from 1 to 254
Addressing Mode: Non-coding: Alarm Tone, Single address: Alarm Tone, Dual address:1st Warning / 2nd Alarm
Material / Color: ABS / White Glossy ﬁnishing
Diameter / Height: D: 140 mm/ H:59.1 mm (with cover)
Weight: 194g (With a cover)/176g(Without a cover)
Class: Type A, Indoors
Ingress Protection Rating: IP30
Operating Temperature: -10℃ to+55℃
Humidity: 0 to 95% RH, Non condensing

TX7322 Addressable Sounder Base Application

The TX7322 Addressable Sounder Base can be used as a standalone isolator in the whole fire alarm system after installing the decorative cover, or it can be used with programmable detectors, such as TX7100 smoke detector, TX7110 heat detector and TX7120 smoke & heat detector, as their additional functions.

However, when it is used as an isolator alone, it needs to be used with the TX7980 universal base.

TX7 Serials Addressable Fire Alarm Panels

A Fire Alarm System is powerful that not only requires a core control panel like the LPCB CE certified TX7004 FACP (Fire Alarm Control Panel), but also needs to be paired with other detectors, modules, and appropriate configurations based on the project’s scale to maximize its effectiveness.