TX7301 Addressable Fire Alarm Sounder Strobe

40+ years
Experience

400+ Patents
Full sets LPCB

1,000,000+
projects worldwide

Global on site
after sale service

7x24h
response service

Overview: TX7301 Addressable Sounder Strobe

TX7301 Addressable Sounder Strobe sends fire alarm signals to the alarm area in the form of sound and light. It is the most commonly used alarm device on site. Applicable places: floor staircases, fire elevator antechambers, evacuation passages, etc.

Feature and Beneﬁts

•EN54-3 Compliance
•Built-in MCU processor and digital addressing
•17 tones Programmable sound output
•Programmable types such as Sounder-Strobe, Sounder or Strobe alone
•Programmable Evacuate or Pre-alarm/Evacuate signal
•Low and normal consumption mode
•One or Two addresses mode
•10 Highlights LED status cluster
•Onsite Adjustable Parameters
•Loop or external power input
•Wall mount

Technical Speciﬁcation

Input Voltage: Loop Power: 24VDC [18V to 27.5V], External PSU: 24 VDC [20V to 27.5V]
Typical Current: Loop Standby: 0.7mA, Alarm: 1.5mA [Loop and External PSU], External PSU Standby: 0.6mA, Alarm:22mA
Saving Current: Standby: 1.2mA, Alarm: 9mA[Loop powered]
Protocol/Addressing: T&A, Value range from 1 to 254
Single Address: Evacuate Tone
Dual Address: 1st Alert Tone / 2nd Evacuate tone
Sound Level Pressure: 102dB(A) at 1 meter
Strobe Light: 10 Highlights LED
Material / Color: ABS / RED Glossy ﬁnishing
Dimension / LWH: 152.5 x 88.5 x 46.75 mm (without base)
Weight: 184g (with Base), 124g (Without Base)
Class: Type A, Indoors ,
Operating Temperature: -10℃ to+50℃
Ingress Protection Rating: IP21
Humidity: 0 to 95% RH, Non condensing

TX7 Serials Addressable Fire Alarm Panels

A Fire Alarm System is powerful that not only requires a core control panel like the LPCB CE certified TX7004 FACP (Fire Alarm Control Panel), but also needs to be paired with other detectors, modules, and appropriate configurations based on the project’s scale to maximize its effectiveness.