TX7320 Addressable Fire Alarm Sounder

40+ years
Experience

400+ Patents
Full sets LPCB

1,000,000+
projects worldwide

Global on site
after sale service

7x24h
response service

Overview: TX7320-Addressable-Sounder

The TX7320-Addressable-Sounder sound alarm sends a fire alarm signal to the alarm area in the form of sound, and is generally used in places with relatively loud noises. Applicable places: airports, train stations, railway stations, etc.

Feature and Benefits

•EN54-3 Compliance
•Built-in MCU processor and digital addressing
•17 tones Programmable sound output
•Programmable Evacuate or Pre-alarm/Evacuate signal
•Low and normal consumption mode
•One or Two addresses mode
•Onsite Adjustable Parameters
•Loop or external power input
•Ceiling or wall mount installation

Technical Specification

Input Voltage: Loop Power: 24VDC [18V to 27.5V], External PSU: 24VDC[20V to 27.5v]
Typical Current: Loop Standby: 0.6mA,Alarm:1.5mA [Loop andExternal PSU], External PSU Standby: 0.6mA, Alarm: 12mA
Saving Current: Standby: 1.2mA,Alarm: 7mA[Loop powered]
Protocol/Addressing: T&A, Value range from 1 to 254
Single Address: Evacuate Tone
Dual Address: 1st Alert Tone / 2nd Evacuate tone
Sound Level Pressure: 102 dB(A) at 1 meter/ tone 14
Material / Colour: ABS / RED Glossy finishing
Dimension/ Height: Diameter 110 mm / 39.6 (with Base)
Weight: 180g (with Base), 114g (Without Base)
Class: Type A, Indoors ,
Operating Temperature: -10℃ to+50℃
Ingress Protection Rating: IP21
Humidity: 0 to 95% RH, Non condensing

TX7 Serials Addressable Fire Alarm Panels

A Fire Alarm System is powerful that not only requires a core control panel like the LPCB CE certified TX7004 FACP (Fire Alarm Control Panel), but also needs to be paired with other detectors, modules, and appropriate configurations based on the project’s scale to maximize its effectiveness.

Fire Alarm System