TX7302 Addressable Sound Light Strobe Base

40+ years
Experience

400+ Patents
Full sets LPCB

1,000,000+
projects worldwide

Global on site
after sale service

7x24h
response service

Overview: TX7302 Sound Light Strobe Base

The fire sound and light alarms are usually installed in public places such as outside corridors. When a fire occurs, people in the room cannot clearly get the fire alarm signal outside, and the fire alarm effect is not ideal.

In order to solve the above problems, a fire alarm base with sound and light alarm function is used, which integrates fire detection and alarm, and has a good alarm reminder effect through sound and light alarm.

Feature and Beneﬁts

•EN54-3 Compliance
•8 high-light LED Loop powered sounder strobe detector base
•Can be activated by the attached detector
•Built-in MCU processor and digital addressing
•17 tones Programmable sound output
•Programmable Evacuate or Pre-alarm/Evacuate signal
•Programmable One or Two address mode
•Onsite Adjustable Parameters
•Mounting base using TX7980 (excluded)

Technical Speciﬁcation

Approvals: LPCB/CE-CPR
Input Voltage: Loop Power: 24VDC [16V to 28V]
Current Consumption: Standby≤ 0.8mA, Alarm: ≤5mA[Loop powered]
Protocol/Addressing: T&A, Value range from 1 to 254
Addressing Mode: Single Mode: Alarm tone, Dual Mode 1: 1st Alarm/2nd warning, Dual Mode 2: 1st Warning / 2nd Alarm
Material / Colour: ABS / White Glossy ﬁnishing
Diameter / Height: D: 140 mm/ H:59.1 mm (with cover)
Weight: 198g (with cover)/180g (without cover)
Class: Type A, Indoors
Ingress Protection Rating: IP30
Operating Temperature: -10°C to +55°C
Humidity: 0 to 95% RH, Non condensing

TX7302 Addressable Sound Light Strobe Base Application

The TX7302 Addressable Sound Light Strobe Base can be used as a standalone isolator in the whole fire alarm system after installing the decorative cover, or it can be used with programmable detectors, such as TX7100 smoke detector, TX7110 heat detector and TX7120 smoke & heat detector, as their additional functions.

However, when it is used as an detector alone, it needs to be used with the TX7980 universal base.

TX7 Serials Addressable Fire Alarm Panels

A Fire Alarm System is powerful that not only requires a core control panel like the LPCB CE certified TX7004 FACP (Fire Alarm Control Panel), but also needs to be paired with other detectors, modules, and appropriate configurations based on the project’s scale to maximize its effectiveness.